Solar hot water systems for Western MA, Southern VT, Southwest NH and surrounding areas
Spartan Solar
  • About / Services
  • How it works
  • Incentives
    • Residential
    • Commercial / Agricultural
  • FAQ's
  • Contact
  • Examples of our work
  • Spartan Solar Blog
  • Employment Opportunities

Massachusetts Ends Rebate for PV, but not Solar hot water.

2/2/2015

1 Comment

 
As of the beginning of 2015, the rebate for PV (solar electric) has come to an end and is being replaced by a low interest loan program. SREC's and tax credits remain in place.

On the other hand, the rebate for solar hot water (up to $4500 for a residential system) is still in effect. In a private conversation with my contact at the CEC I was told that it is not going away any time soon.  In fact, this summer there is going to be additional incentives available through a new REC (renewable energy credit) program.  No details are available yet, but it will probably look similar to the Solar PV REC program.
1 Comment

Our Most Recent Solar Hot Water System

2/2/2015

0 Comments

 
In December we installed an eight panel solar hot water system that provides both potable hot water and space heating for a work shop. Our customer, Dave Cimma, already had a three panel system which he refurbished and had been running for a couple of years. It was time to go big though! In order to eliminate (as much as possible) the electric bill for heating the shop the new system is nearly 4 times the size. It utilizes 8 Heliodyne panels and a 120 gallon Stiebel Eltron  tank along with Dave's existing old Sepco tank and domestic hot water system. We had a blast installing it and working with Dave. In part because there are several really exciting elements to this system:
  • Our customer Dave is a controls engineer and designed and implemented his own data collection and monitoring system. It can be viewed at http://www.davecimma.com/Barn/SystemView.html  
  • When Dave had his workshop built, in addition to a radiant slab, he also included what is known as sand bed storage system. The general idea is to put an insulated box around all of the fill that goes under the slab and put pex tubing in it. Then, during the fall, before one really needs much heat, charge the large mass of sand with heat. There are not many examples of sand bed design that are available so we are looking forward to seeing how this one performs as well as providing public data for it. 
  • The system we installed is a drain-back style system that is charged with water--not the typical fluid: glycol. The design means that when the system is off, air from a holding tank rises into the panels and the water falls into the holding tank. This simple design provides both overheat and freeze protection.
Picture
Since this is a drain back system, the panels need to be slightly tilted to ensure that the fluid drain out. Photo by Dave Cimma
0 Comments

    Archives

    May 2018
    March 2017
    February 2017
    November 2016
    March 2015
    February 2015
    December 2014
    November 2014
    October 2014

    Categories

    All

    RSS Feed

Spartan Solar    |    (413) 768 - 0095    |      [email protected]